Technical

cETLus vs UL 879: What Each Listing Covers

Compare cETLus control 5026656 and UL 879 file E555479 for signage LEDs: what each listing covers, how many models, and which buyers need which.

GMH Lighting · Published November 18, 2026 · Updated November 18, 2026 · 5 min read

Short answer

cETLus and UL 879 are two different compliance references for signage LEDs. cETLus is an ETL listing mark showing a product meets both Canadian and US requirements; GMH lists 34 models under control 5026656. UL 879 is the electric sign components standard, under which 7 models are listed at file E555479. Buyers should match exact model numbers to the right listing.

Key points

  • cETLus is a certification mark from Intertek; UL 879 is the electric sign components standard — one is a logo, one is a rulebook.
  • GMH lists 34 models under cETLus control 5026656 and 7 models under UL 879 file E555479.
  • Match the exact model on your order to the certificate; a listing on one file never covers the whole catalogue.

Definition: two different things that get compared

cETLus and UL 879 are often written together on a signage quotation, but they are not the same kind of document. cETLus is a certification mark issued by Intertek through its ETL service. The lowercase “c” and the “us” together mean the product has been evaluated to both Canadian and United States requirements. UL 879, by contrast, is the title of a standard — Electric Sign Components — which sets out the safety requirements for parts used in electric signs.

The commercial consequence is straightforward. A “cETLus listing” tells you who certified the product and for which markets. “UL 879” tells you which rulebook was applied. A supplier can legitimately hold both, and North American distributors increasingly ask to see both before they release a container.

The two listings compared

AttributecETLusUL 879
What it isCertification mark (Intertek ETL)Listing to a published standard
Reference numberControl 5026656File E555479
Models covered347
Markets indicatedCanada and United StatesNorth America
Question it answersWho certified it, and for which marketWhich safety standard was applied

Read the table as two different axes. The mark is the visible symbol on the label; the standard is the test criteria behind it. Neither replaces the other, and neither says anything about how bright or efficient the LED is.

Mark versus standard, and why it matters

A certification mark is the visible proof that a third-party laboratory tested a product. The standard is the set of rules that laboratory applied. When a tender says “UL 879 listed,” it is asking for the rulebook. When it says “cETLus listed,” it is usually asking for a particular mark from a particular laboratory. Many electrical inspectors will accept either mark provided the applicable standard is met, but the written specification on the project is what you have to satisfy.

For a purchaser, the practical risk is not the logo on the box. It is whether the exact model on the purchase order actually appears on the certificate behind that logo. This is where the two GMH listings diverge, because they do not cover the same products.

What the numbers actually mean

The figure 5026656 is an Intertek control number — the reference under which the cETLus listing is filed. E555479 is a UL file number. Neither is a performance rating. Both are lookup keys that let you pull the certificate and see the model list.

The model counts deserve more attention than the file numbers. GMH’s cETLus listing covers 34 models, while the UL 879 listing covers 7. Those are different scopes. A module that appears under the cETLus listing is not automatically one of the 7 models on the UL 879 file. The most common mistake in quotation review is treating “we hold UL 879” as a blanket statement about the entire catalogue, when in fact only a subset of models is named.

Ask the supplier to state which listing covers the specific SKU you are buying, and to send the certificate page that prints the model number. If the model is not on the page, the claim does not help your inspection.

How to verify a listing before you order

  1. Request the certificate or listing page, not just a verbal claim.
  2. Locate your exact model number in the document’s model list.
  3. Check the reference number — 5026656 for cETLus, E555479 for UL 879.
  4. Confirm the mark covers both markets when a sign ships to Canada and the US.
  5. File the document with the order so the installing electrician can produce it on site.

Five minutes of checking at the quotation stage avoids a container held at customs or rejected at inspection. Detailed specifications for the hardware itself belong in the LED module buying guide.

When to use it — and when not to

Use these listings when:

  • A North American distributor or specifier requires a recognized safety mark on sign components.
  • A tender names UL 879 or an equivalent standard for electric sign components.
  • You are submitting documents to an electrical inspector who needs a file or control number.
  • The sign will be installed in both Canada and the US and needs dual-market coverage.

Do not rely on them when:

  • You are shipping to Europe and need CE or RoHS — cETLus and UL 879 do not substitute for EU conformity marking.
  • You are comparing light output, viewing angle or colour temperature — those are optical specifications, not safety listings, and a listed module can still be the wrong brightness for a 4–25 cm channel.
  • You assume the whole catalogue is certified — only 34 models sit under cETLus and 7 under UL 879; other SKUs may not be listed.
  • You need a claim about the finished sign — these listings cover components, not the assembled installation, which also depends on wiring, enclosure and the correct power supply sizing.

Scope and limits

This article explains how a buyer should read two specific listings held by GMH — cETLus control 5026656 and UL 879 file E555479. It does not reproduce the test procedures inside UL 879, and it does not confirm that any particular SKU is among the 34 or 7 models without checking the certificate. It does not cover CE, RoHS, FCC or other non-North-American schemes. Local installation codes are set by the authority having jurisdiction, so this is orientation for a purchasing decision, not code advice.

This article describes general manufacturing practice for machined and fabricated components. It is not a substitute for a drawing-specific engineering review — tolerances, material selection and process capability depend on the individual part.

Questions

Frequently asked

Is cETLus the same as UL listed?

No. cETLus is a certification mark issued by Intertek under its ETL service, while UL is a different testing laboratory. Both are North American safety listings, and many inspectors accept either when the correct standard is met. The real question is whether your exact model appears on the certificate, not which logo is printed on it.

What is UL 879 for LED sign modules?

UL 879 is the standard titled Electric Sign Components. It defines safety requirements for parts used in electric signs, including modules and power supplies. A product 'listed to UL 879' has been tested against that standard by a recognized laboratory. GMH holds a UL 879 listing under file E555479 covering 7 models.

How do I check whether my module is covered by a listing?

Ask the supplier for the certificate page, then find your exact model number in its model list. Confirm the control or file number matches the claim — 5026656 for cETLus or E555479 for UL 879. A listing on one file does not automatically include SKUs listed on another.

Does cETLus cover both Canada and the United States?

Yes. The lowercase c and the us in cETLus indicate evaluation to both Canadian and US requirements. That makes it useful for projects shipping to both markets. Confirm the specific model on the certificate covers both markings before you rely on it for a Canadian installation.

Tell us your sign project, get a product recommendation

Share your sign design — letter depth, face material, indoor or outdoor — and we will recommend the right LED modules, strip, power supply and protection rating, with a quotation. No obligation.

WhatsApp